Hot Tub Not Working After Power Outage?


After a power outage, your hot tub may not work properly. There are a few things you can check to see if the problem is with the hot tubs themselves or the power.

First, check to see if the power is back on. If it is, then check to see if the circuit breaker for the hot tub is flipped. If it is, then reset it and try again.

If that doesn’t work, then check to see if there is a fuse blown in the heater or hot tub.

If none of these things seem to be the problem, then it may be an issue with the motor or pump. If you suspect this is the case, then you should call a professional to have it checked out.

Hot Tub Getting Power But Nothing Works?

If your hot tub is not working properly, you may need to reset it. But where is the reset button located on a hot tub?

The answer depends on the make and model of the equipment in your hot tub. But in general, the reset button is usually located near the control panel. Sometimes it is behind a small door or panel, so you may need to open that first.

If you can’t find the reset button, or if resetting the hot or cold the tub doesn’t seem to be fixing the problem, you may need to call a professional for help.

How To Reset High Limit Switch On Hot Tub?

If your hot tub’s high-limit switch is activated, it’s likely because the water is too hot. You can reset the high-limit switch by following these steps:

  1. Turn off the power to the hot tub at the breaker box.
  2. Remove the access panel to the high-limit switch.
  3. Use a flat-head screwdriver to turn the reset button on the switch clockwise until it clicks.
  4. Replace the access panel and turn on the power to the hot tub at the breaker box.
  5. Test the water temperature to make sure it’s within a safe range before getting in.

Where Is The Reset Button Located On A Hot Tub?

The reset button on a hot tub is typically located on the control panel.

This is the panel that you use to operate the various functions of the hot tub, such as the jets and the lights.

If you can’t find the reset button on the control panel, it’s likely that it’s located somewhere else in the hot tub. A good place to start looking is near the power cord.

The reset button is usually close to where the power cord attaches to the hot tub.

Once you’ve located the hot water reset button, press it firmly for a few seconds. This will reset the hot tub and allow you to use it again.

If you’re still having trouble finding the reset heat off button, or if the reset button isn’t working, it’s a good idea to contact a hot tub repair technician.

They’ll be able to help you locate the reset button and get your hot tub up and running again.


  • Jason

    Jason is an experienced writer, having contributed to many popular websites over the years. He currently writes for Big Hot Tub, a blog about everything hot tubs. When he's not writing or working on his blog, Jason enjoys spending time with his wife and two young children.