How To Turn Off SL Mode On Hot Tub?


If you find yourself in SL (standby mode) on your hot tub, don’t worry – it’s easy to get out of! All you need to do is follow these simple steps and you’ll be back up and running in no time.

To get started, simply press the button marked “Mode” on your your control system front panel.

Once you’ve done that, use the arrow buttons to scroll through the page of different options until you find the one labeled “Standard.

” Once you’ve selected that desired temperature, your hot tub will automatically exit standby mode and return to its normal operating temperature.

If for some reason your hot tub doesn’t have a “Mode” button, or if you can’t seem to find the “Standard” setting, don’t hesitate to contact your local dealer or manufacturer for assistance.

Why does my hot tub says SL?

In the SLEEP MODE the hot tub pump can only cool down the water in a filter cycle at the same temperature as the water. Each filter can be set for a range from 30mins to 6hour cycle increments.

How To Turn Off Economy Mode On Hot Tub?

If you have a hot tub with economy mode, you may be wondering how to turn it off.

Here’s a quick guide on how to do it.

To turn off economy mode on your hot tub, start by checking the control panel to see if there is a switch or button labeled economy.

If so, simply switch or push the button to the “off” position.

If there is no such switch or button, you’ll need to consult your hot tub’s owner’s manual for instructions on how to disable economy heating mode.

Once you’ve found the appropriate setting in the manual, make sure to follow any other instructions provided before turning off economy mode.

With economy mode turned off, your hot tub will consume more energy but will also heat up more quickly and maintain its temperature more effectively.

How To Get Hot Tub Out Of Sleep Mode?

If you find yourself in a situation where your hot tub is stuck in sleep mode, don’t worry – there are a few things you can do to get it out.

First, check to see if there is anything obstructing the flow of water into the spa or hot tub.

If there is, clear it away and try again.

If that doesn’t work, you may need to reset the circuit breaker.

To do this, simply flip the switch off and then back on again.

Finally, if all else fails, you can always call a professional to help you troubleshoot the problem.

When Should I Put The Hot Tub In Sleep Mode?

If you live in a colder climate, you might be wondering when the best time to put your hot tub in sleep mode is.

Here are a few things to keep in mind when making a decision.

The first thing you need to take into account is how often you’ll be using the hot tub.

If you plan on using it every day, then there’s no need to put it into sleep mode.

However, if you only use it on weekends or a couple of times a week, then putting it into sleep mode when you know you won’t be using it for a while can help save energy and money.

Another thing to consider is the temperature outside.

If it’s already cold out, then there’s no need to keep the hot tub running since it will take longer to heat up again.

What Is SLP Code On Hot Tub?

If you’ve ever shopped for a hot tub, you may have come across the term “SLP code.

” But what is this code, and why is it important?

In short, the SLP code is a measure of a hot tub’s energy efficiency.

The higher the SLP code, the more secure and more energy-efficient the hot tub is.

This means that it will cost less to operate and heat.

So, if you’re looking for an energy-efficient hot tub, be sure to check the SLP code.

It can make a big difference in your monthly operating costs.

How Do I Change My Hot Tub To Standard Mode?

If you’re like most people, you probably don’t think about your hot tub until you’re ready to jump in.

But what happens when you want to change things up and switch from standard mode to one of the other modes?

Here’s a quick guide on how to change your hot tub to standard mode:

  1. First, find the control panel. This is usually located near the hot tub.
  2. Second, identify the button or switch that says “Standard.”
  3. Once you’ve found it, simply press the button or flip the switch to change your hot tub’s mode.

It’s really that simple! So next time you’re in the mood for a relaxing soak, make sure your hot tub is in standard mode.

How To Get Viking Hot Tub Out Of Economy Mode?

If you have a viking hot tub, you may find that it goes into economy mode from time to time.

This can be frustrating, but there are a few things you can do to get it out of economy mode.

First, try resetting the tub by turning it off and then back on again.

If that doesn’t work, you may need to call a technician to come and take a look at the tub.

In most cases, getting the viking hot tub out of economy mode is simply a matter of resetting set temperature on the tub or having a technician take a look at it.

However, if you’re still having trouble, you may want to consider replacing the tub altogether.

How do I get my Balboa hot tub out of SL mode?

Tap “Temp” and “Light” for mode changes.


  • Jason

    Jason is an experienced writer, having contributed to many popular websites over the years. He currently writes for Big Hot Tub, a blog about everything hot tubs. When he's not writing or working on his blog, Jason enjoys spending time with his wife and two young children.